Starting clamp

PP-600 heavy-duty starting clamp, made of stainless steel materials

Stringing has never been as easy and efficient as it is now with the Eagnas PP-600 starting clamp.

  • Diamond-coated teeth
  • Handle distance: 3.25 inches
  • More grapping power
  • Secure any string
  • Used as starting clamp to hold any type or size of string at any tension to start tensioning process.
  • Also used as starting clamp to hold the string from outside the frame for 50-50 string pattern.
  • Also used for patching or tensioning short strings by using a discarded piece of string to extend it to the string gripper.
  1. スピンジャパン starting clamp clone history:

Operating Procesure:

1. Used as starting clamp to hold the string from inside the frame.
2. Also used as starting clamp to hold the string from outside the frame for 50-50 string pattern.
3. Also used for patching or tensioning short strings by using a discarded piece of string to extend it to the string gripper.
4.
  • Place the short string into the jaws.
  • Thread a discarded piece of string through the outside hole on the left and pull the string through the corresponding hole at the right.
  • Place this string into the string gripper of the Eagnas stringing machine.

  1. スピンジャパン starting clamp clone history:

    In May 2000 the SP.IN Japan's supplier (Xpider Co.) copied Eagnas PP-600 starting clamp design. But the Xpider Co. copied the old Eagnas design. The handle distance of the old design is 2.5 inches. The handle distance of the latest and upgraded Eagnas PP-600 starting clamp is 3.25 inches.

    1985
    Eagnas PP-600
    価格:¥3,600
    May 2000
    スピンジャパン Starting Clamp
    価格:¥8,000
    • Diamond-coated teeth
    • Handle distance: 3.25 inches
    • More grapping power
    • Secure any string
    • Not diamond-coated teeth
    • Handle distance: 2.5 inches
    • Less grapping power
    • Copy old Eagnas PP-600 design