Linear ball bearing string gripper

Linear ball bearing string gripper with drum

  • Make stringing much easier and faster.
  • No crimp or damage to any string
  • No muscle needed.

Operating Procesure:

1.  Wrap the string clockwise around the drum once.
2.  Place the string into the string gripper.
3.  Use the left hand to hold the string at about a right angle to the string gripper.
4.  Use the right hand to press the tension switch once. The linear ball bearing string gripper will grip the string while the electronic tension head pulls the string.
5.  After the string gripper grips the string, the left hand could release the string.
6.  Then let the electronic tension head pulls the string by itself until the electronic tension head stop pulling. When the correct tension is reached, the electronic tension head stops the tension pulling and the tension indicator (amber) flashes. This means that the correct tension is reached.